電壓擊穿試驗儀數據
電壓擊穿試驗儀概述
Voltage breakdown tester overview
電壓擊穿試驗儀采用計算機控制，通過人機對話方式，完成對絕緣介質材料的工頻電壓擊穿，工頻耐壓試驗。
Computer controlled by voltage breakdown testing instrument, through the man-machine dialogue mode, the completion of the power frequency voltage breakdownof dielectric material, power frequency withstand voltage test.
適用于對固體絕緣材料(如：絕緣漆、樹脂和膠、浸漬纖維制品、層壓制品、云母及其制品、塑料、薄膜復合制品、陶瓷和玻璃等)在工頻電壓下?lián)舸╇妷海瑩舸?qiáng)度和耐電壓的測試。
Suitable for solid insulation materials (such as: insulating paint, resin and rubber,impregnated fiber products, laminated products, mica and its products, plastic, thin film composite products, such as ceramic and glass) in the breakdown voltage ofpower frequency voltage, breakdown strength and voltage withstand test.
儀器對實驗過程中的各種數據快速、準確地進行采集、處理、存取、顯示、打印。
Instruments of various kinds of data in experiment process fast, accurayacquisition, processing, display, printing, access.
電壓擊穿試驗儀滿足標準：
Voltage breakdown tester to meet the standard:
GB1408-2006 GB/T1695-2005 GB/T3333 HG/T3330 /GB12656 /ASTM D149 .
GB1408-2006 GB/T1695-2005 GB/T3333 HG/T3330 /GB12656 /ASTM D149.
GB1408-2006 絕緣材料電氣強度試驗
GB1408-2006 insulation electrical strength test of material
GB/T1695-2005 硫化橡膠工頻電壓擊穿強度和耐電壓強度試驗
GB/T1695-2005 vulcanized rubber power frequency voltage breakdown strengthand voltage resistance strength test
GB/T3333 電纜紙工頻電壓擊穿試驗
GB/T3333 cable paper power frequency voltage breakdown test
HG/T 3330絕緣漆漆膜擊穿強度測定
HG/T 3330 insulation paint film breakdown strength determination
GB12656 電容器紙工頻電壓擊穿試驗
GB12656 capacitor paper power frequency voltage breakdown test
ASTM D149 固體電絕緣材料在工業電源頻率下的介電擊穿電壓和介電強度試驗
ASTM D149 of solid electrical insulating materials at commercial power frequenciesthe dielectric breakdown voltage and dielectric strength test
電壓擊穿試驗儀設備安全保護功能：
Voltage breakdown testing instrument equipment safety protection function:
◆ 試驗在試驗箱中進行，試驗箱門打開時電源加不到高壓變壓器輸入端，即高壓側無電壓。100KV測試設備高壓電極距離試驗箱壁的zui近距離大于370mm，50KV測試設備高壓電極距離試驗箱壁的zui近距離大于250mm，試驗時即使人接觸箱壁也不會有危險。
The experiment was conducted in the experimental box, test box door is opensource applied to high voltage transformer input end, no voltage is high pressureside. 100KV test equipment of high voltage electrode distance test box wall nearestdistance is greater than 370mm, 50KV test equipment of high voltage electrodedistance test box wall nearest distance is greater than 250mm, the test even whenpeople contact the wall of the box will not be in danger.
◆ 設備要安裝單獨的保護地線。接保護地線，主要是減少試樣擊穿時對周圍產生的較強的電磁干擾。也可避免控制計算機失控。
The equipment to install a separate protective ground. Grounding protection ground, mainly is the strong electromagnetic interference to reduce the sample breakdown when the surrounding the. Also avoid control computer control.
◆ 該試驗設備的電路設有多項保護措施，主要有：過流保護、失壓保護、漏電保護、短路保護、直流試驗放電報警等。
The test circuit of the device is provided with a number of protective measures,mainly include: over current protection, voltage loss protection, leakage protection,short-circuit protection, DC test discharge alarm.
◆直流試驗放電報警功能:在設備做完直流試驗時,當開啟試驗門時設備會自動報警,直至使用設備上的放電裝置放電后報警會自動取消.(注：因?yàn)橹绷髟囼?yàn)后不放電會危險到人身安全,不能直接拿取電極,起到提醒使用人員放電以免造成人身傷害)。
The DC discharge alarm function: in the equipment finished the DC test, when opening the door when the test equipment will automatically alarm, discharge device discharge until use equipment after the alarm will be cancelled automatically. (Note: because the DC test and not put electricity danger to personal safety, can not directly get electrode, to remind the use of personnel in order to avoid personal injury) Adult discharge.
◆ 試驗放電裝置，隨主機為一體化，改進了以往單獨配備一根放電桿的功能。
The experimental discharge device, with the host for the integration, improves the past with separate one puts pole function.
軟件功能:
The software function:
01、軟件平臺：WINDOWS窗口操作平臺，界面直觀，便于操作
01, the software platform: WINDOWS windows operating platform, intuitive interface, easy operation
02、曲線顯示：在實驗過程中可以動態顯示試驗曲線
02, curve display: during the experiment can dynamically display the test curve
03、數據導出：可以對試驗結果導入EXCEL表格
03, data export: to the test results into EXCEL table
04、實驗報告：可以人為設置報告名稱，并對實驗報告進行打印
04, the report of the experiment: can be artificially set the report name and print on the experimental report
05、試驗方式：可以根據需求對直流試驗和交流試驗進行靈活選擇
05, test mode: can flexibly select for DC test and AC test according to the requirements of
06、試驗方法：可以根據需求自行選擇擊穿電壓、耐壓試驗、梯度試驗
06, test methods: you can choose the breakdown voltage, voltage withstand test,gradient test according to the requirements of
07、參數設置：可以根據不同的試驗方式及試驗方法靈活設置所需的不同參數值
07, the parameter settings: you can test different ways according to different parameters and test methods flexibly set the required value
08、試樣設置：可對不同標準的試樣參數靈活設置
08, the sample set: on the specimen parameters of different standard flexiblesettings
09、人員管理：設置用戶名及密碼，不同的操作員登入進行不同的試驗，互不影響
09, personnel management: set the username and password, different operators indifferent test, mutual influence
10、標準選擇：含有不同標準，可根據需求自行選擇
Selection criteria: 10, with different standards, can choose according to need
11、連續操作：連續操作試驗時，可直接在軟件里選擇電機復位，進行二次試驗
11, continuous operation: continuous operation test, can directly select the motorreset in software, carries on two times of test
電壓擊穿試驗儀技術指標：
Voltage breakdown tester technical indicators:
01、輸入電壓： 交流 220 V
01, the input voltage: AC 220 V
02、輸出電壓： 交流 0--100 KV ;
02, the output voltage: AC 0--100 KV;
直流 0—100 KV
DC 0 - 100 KV
03、電器容量： 10KVA
03, electrical capacity: 10KVA
04、高壓分級： 0-100KV
04, high grade: 0-100KV
05、升壓速率：0.01-5.0kv
05, the rate of pressure rise: 0.01-5.0kv
（備注：滿足標準要求并可以根據用戶需求設定不同的升壓速率）
(Note: to meet the standard requirement and can be set to boost rates for differentaccording to user needs)
06、試驗方式：
06, test methods:
直流試驗：1、勻速升壓 2、梯度升壓 3、耐壓試驗
DC test: 1, 2, 3 speed boost pressure gradient, pressure test
交流試驗：1、勻速升壓 2、梯度升壓 3、耐壓試驗
AC test: 1, 2, 3 speed boost pressure gradient, pressure test
07、試驗介質：空氣，試驗油
07, the test medium: air, test oil
08、安裝靈敏度較高的過電流保護裝置保證試樣擊穿時在0.05S內切斷電源。
Over current protection device 08, the installation of high sensitivity to ensure the power supply is cut off in the 0.05S sample breakdown.
09、儀器配備先進的故障報警系統 避免用戶操作故障儀器發生危險。（上位機報警和下位機報警）
09, the instrument is equipped with advanced fault alarm system to avoid user faultinstrument of danger. (the host computer and slave computer alarm alarm)
電壓擊穿試驗儀整機組成：
Voltage breakdown tester machine component:
1、升壓部件：由調壓器和高壓變壓器組成0～50KV的升壓部分。
1, the step-up component: a pressure regulator and high voltage transformer iscomposed of 0 ~ 50KV pressor part.
2、動部件：由步進電機均勻調節調壓器使加給高壓變壓器的電壓變化。
2, dynamic components: by stepping motor even regulator is adjusted make added to the voltage change of the high voltage transformer.
3、檢測部件：由集成電路組成的測量電路。通過信號線把檢測的模擬信號和開關信號傳給計算機。
3, detecting component: measuring circuit is composed of integrated circuit. The detection of the analog signal and switch signal to the computer through the signal line.
4、計算機軟件：通過智能電路把由檢測設備采集的測控信號傳給計算機。計算機根據采集的信息控制設備運行并處理試驗結果。
4, computer software: the control signal by the detection equipment acquisition to the computer through the inligent circuit. According to the information collected by computer control equipment operation and processing test results.
5、試驗電極：根據國家標準(1408.1-2006)隨設備提供三個電極，具體規格為：Ф25mm×25mm兩個；Ф75mm×25mm一個。
5, the test electrode: according to the national standard (1408.1-2006) provided with the equipment of three electrodes, specifications: diameter of 25mm * 25MMtwo; with 75mm * 25MM a.
標簽：電壓擊穿試驗儀，介電擊穿強度試驗儀，耐電壓擊穿測試儀，工頻電壓擊穿測試儀，電壓擊穿儀，工頻介電擊穿強度測定儀，工頻耐電壓擊穿試驗機，電壓擊穿試驗機，絕緣材料電氣強度測試儀，擊穿強度試驗儀，電氣強度測試儀，介電強度試驗機，擊穿電壓試驗機，電氣介電強度試驗儀，固體絕緣材料電氣強度試驗儀，硫化橡膠工頻擊穿電壓強度耐電壓擊穿測
Tags: voltage breakdown tester, tester dielectric breakdown strength, high voltagebreakdown tester, power frequency voltage breakdown tester, voltage breakdowntester, frequency dielectric tester electrical breakdown strength, power frequencywithstand voltage breakdown tester, voltage breakdown testing machine, electrical insulation material strength tester, breakdown strength tester, electric strength the test instrument, the dielectric strength test machine, the breakdown voltage tester,electrical and dielectric strength tester, tester electrical strength of solid insulatingmaterials, vulcanized rubber power frequency voltage breakdown strengthwithstanding voltage breakdown test
標簽：
電壓擊穿試驗儀
介電擊穿強度試驗儀
耐電壓擊穿強度試驗儀
高電壓擊穿試驗儀
